WS/23-75DT Chipper

CONVENIENCE AND SAFETY TO IMPROVE YOUR EVERYDAY WORK! 1- KOHLER KDI 75 HP (55.4 KW) 4-cyl. diesel engine Water-cooled, direct injection 2- ?SWING? PILOT SYSTEM

GS/PUMA D Shredder

Patented mixing rotor, feed conveyor, display panel, control system...

GS/COBRA-D Shredder

Thanks to the patented mix-rotor of the multi-vegetation shredders! From TS Industrie, Branches and hedge trimmings are no longer waste!

GTS750

The GTS750 has the same compactness as the GTS600, but with greater performance due to a wider and heavier rotor system.

GTS1800C

This wood chipper is equipped with a 20 hp Loncin engine and can handle branches up to 12 cm in diameter. Our efficient rotor chipping system ensures a high working speed and causes perfectly sized wood chips to reuse as mulch or compost.

GTS1800WD

We are proud to present the new GTS1800WD (WD = Wheel Driven), a self-propelled powerful wood chipper for professional use in the field of tree maintenance and landscaping. With the GTS1800WD you can shred fresh cut wood with a maximum diameter of 12 cm and dry wood of 10 cm.

GTS1300WD

The battery powered (2 x 12 V) self-propelled system has an impressive autonomy of 9.5 kms on flat paved ground and approximately 3 kms on hilly or muddy terrain. It has two speeds forward (3 and 6 km/h) and two reverse speeds (1.5 and 3 km/h).

GTS1300C

Multifunction chippers with two output chute.

Choose low output chute when chipping branches wet and fresh.

Choose low output chute when chipping branches wet and fresh.

GTS1300S

Equipped with safety items. Branches with a diameter up to 10 cm

are easily pulled in and chipped.

Equipped with a

Elephants Trunk

The machine weight could be reduced to 20%-40%.

Efficiency could be improved by 40%. Extensibility and flexibility could be improved a lot.

GTS600 Wood Chipper

Branches with a diameter up to 5 cm are easily pulled in and chipped.

High output chute with deflector, easy to collect the chips.

GTS900C

Branches with a diameter up to 8 cm are easily pulled in and chipped.

High output chute with deflector, easy to collect the chips.